Technical specifications

Accuracy (from applied pressure):

Models 250 and 2500: 

Pressure < 125 Pa = 1 % + ±1 Pa 

Pressure > 125 Pa = 1 % + ±2 Pa

Model 7000: 

Pressure < 125 Pa = 1.5 % + ±1 Pa 

Pressure > 125 Pa = 1.5 % + ±2 Pa

(including: general accuracy, temperature drift, linearity, 

hysteresis, long term stability, and repetition error) 

Thermal effects: 

Temperature compensated across the full spectrum of capability

Overpressure: 

Proof pressure: 25 kPa 

Burst pressure: 30 kPa

Zero point calibration: 

Automatic autozero or manual pushbutton 

Response time: 

4.0 s or 0.8 s, selectable via jumper

Media compatibility: 

Dry air or non-aggressive gases

Measuring units: Pa, kPa, mbar, inchWC, mmWC, psi, selectable via jumper 

Measuring element: 

MEMS 

Environment: Operating temperature: -10...50 °C 

Storage temperature: -20...70 °C 

Humidity: 0 to 95 % rH, non condensing

Physical

Dimensions: Case: 90.0 x 95.0 x 36.0 mm 

Weight: 150 g 

Mounting: 2 each 4.3 mm screw holes, one slotted 

Materials: 

Case: ABS 

Lid: PC 

Duct connectors: ABS 

Tubing: PVC 

Protection standard: IP54

Display (Optional) 

2-line display (12 characters/line) 

Line 1: active measurement 

Line 2: units 

Electrical connections:  

4-screw terminal block Wire: 0.2–1.5 mm2 (12–24 AWG) 

Cable entry: M16 

Pressure fittings:  

Male Ø 5,0 mm and 6,3 mm 

+ High pressure 

− Low pressure 

Electrical

Voltage:  

Circuit: 3-wire (V Out, 24 V, GND) 

Input: 24 VAC or VDC, ±10 % 

Output: 0–10V Power consumption: <1.0 W 

Resistance minimum: 1 kΩ

Current:

Circuit: 3-wire (mA Out, 24 V, GND)

Input: 24 VAC or VDC, ±10 %

Output: 4–20 mA 

Power consumption: <1.2 W

Maximum load: 500 Ω

Conformance

Meets the requirements for CE marking: 

EMC Directive 2014/30/EU

RoHS Directive 2011/65/EU

WEEE Directive 2012/19/EU

2

3